Vendor: WMD
Regular price $289 Sale price $289 Regular price $349
Sale 17.19% $60 (17.19%)
Shipping calculated at checkout.
In stock: 2
Description

October 2024 - I've tested the last few of these and they're in stock. Once they're gone, that's it. Thank you! 

Now shipping in black only!

A variable-width bandpass filter with fast and tactile controls.

Aperture is capable of simple filtering, self oscillation FM timbres, nasty acidic squelches, and capturing images of UFOs descending from the heavens on a cold winter’s night.  The concept is a bandpass that ranges from transparent to gnarly, with precision controls that behave under stress, all while being joyful to wreak havoc with.

Aperture works very well as a part of a subtractive synthesizer voice paired with your favorite oscillator as well as a signal processing unit.  Use it as a Eurorack EQ by running drum loops or other program content with full a frequency range through it to help them sit in your mix a bit better.  Pinpoint the exact instruments by dialing in on a narrow frequency band. 

Drive your sound and add unique rhythmic content by adding some feedback.  Sweep any one of it's parameters with direct CV control.

Aperture is a versatile addition to any Eurorack live performance rig as it is a great sounding filter for bass, drums, leads, pads, and entire mixes as an end of chain filter.

This is filter more unique than most  standard multimode filters as it has both high-pass and low-pass filters ran in series.  Each filter is independently controllable in addition to the macro controls that control both sides at once.

Aperture can be used in self oscillation as a screaming, wild sounding oscillator with it's 1V/oct input.  It tracks 4 octaves or so.  Not a precision oscillator by any means, but has a very unique tonal quality as it has two resonance points as well as feeback for the entire filter's circuit.

    PDF MANUAL

    • Variable bandwidth via tactile and CV controls
    • Eight pole filter core
    • Independent resonance and self oscillation of both sides of the filter with CV
    • Feedback circuit with two modes and CV 
    • Input level VCA
    • Additional CV for opening the band either side of Center
    • V/oct tracking
    • Temperature compensated
    • Dry / Wet mix for parallel filtering sounds

     


     

     

     

    Controls

    *LEDs along the top indicate width and position of the filter

    Knobs

    Frequency: Controls the center frequency
    of the band

    Width: Controls the width of the band.

    Freq CV: Attenuverter for the CV input for precise
    control over the Frequency of the filter.

    HP Res: Controls the amount of resonance on the
    High Pass side of the filter.

    LP Res: Controls the amount of resonance on the
    Low Pass side of the filter.

    Input Level: Attenuates the input level.
    Unity at 12o'clock, total gain of 6 dB
    Feedback: Controls the amount of feedback for
    more self oscillation and squelchy behavior.

    Dry/Wet Mix: You know what this means ;)

    Width CV: Attenuverter for CV control
    over the width of the filter.

    Jacks

    1V/ Oct: Aperture’s cutoff frequency will track
    at 1V/oct. This is the input for that.

    In LVL: Input for CV control over the input
    level attenuation.

    Freq: CV input for control over the cuttoff frequency.
    Width: CV input for control over the width of the band.

    FDBK: CV input for control over the feedback amount.

    Input: This is where your audio signal you
    want to filter goes.

    Output: This is where the filtered audio
    signal comes out.

    HPCV: CV input for independent control over the
    cutoff frequency on the high pass side of the filter.

    LPCV: CV input for independent control over the
    cutoff frequency on the low pass side of the filter.

    HP Res: CV input for control over the resonance on the
    high pass side of the filter.

    LP Res: CV input for control over the resonance on the
    low pass side of the filter.


     

    Specs:


    • Power: +12V = 120mA; -12V = 100mA
    • Size: 12 HP 
    • Depth: 25mm including power
    • Height: 3U Eurorack
    • Every WMD product is warrantied for 12 months after purchase, but please contact us if you ever have problems. We will take care of you.


    Features
    Specifications
    Manual
    Regulatory & Warranty

    RoHS, CE, & WEEE Compliant

    Manufactured with Lead Free Processes

    WMD is committed to reducing excess and single use plastics in its products and packaging.

    WMD warranties our products for 12 months from purchase date. Please contact us if you have issues.