Channels hardware is entering production in January for shipment in Q2 2025. Preorders are open!
Need More Inputs?
Add four channels at a time to your Performance Mixer MKII setup, or you can use the Channels MKII as a standalone four channel mixer.
The expansion is simple -- identical channels, just more of them. Four at a time, up to four Channels units, for 24 total stereo channels.
A simple 16 pin 2mm pitch expansion cable is provided and is the only connection necessary. Units can be daisy-chained easily resulting in a clean setup.
Additionally, the outputs on Channels MKII still work when connected to the PM MKII. So you get a submix of AUX1, AUX2, and MIX available for whatever you may want to do, drum submixing, FX routing, etc.
Not Just an Expansion -- Standalone Operation
As a standalone unit, you get three stereo outputs, MIX, AUX1, AUX2. The buttons are soft mutes. It's a robust four channel setup.
FYI -- You can not connect CHANNELS MKIIs together without a PM MKII. The summing, buttons, and control brain is in the master section of the PM MKII.
Recording Outputs:
Pre and Post fade headers are available on the rear for connection to the DB25 MKII. Each Chanels MKII will fill 1/2 of a DB25 with the Pre or Post connections.
Características
4 Stereo or Dual Mono Inputs
2x Stereo Auxes
Soft Mute Per Channel
Clip Indicator on Input Gain Pot
Channel strips are field replaceable if a pot or fader fails
CV control over Pan, Level, Aux1, and Aux2
Channel Inserts: Rear cables per channel allow for future insertable effects
Pan/Crossfade Switch for dual mono inputs per channel (panned center)
Rear Headers for Pre and Post Fader/Pan outputs to DB25
LEVEL and AUX2 CV can SUM or operate as VCAs
AUX2 can be Pre Fade or Post Fade
Firmware Update via Connection to PM MKII
All features of PM MKII when connected as expander (MIDI, CUE, GROUP, BUS)
Integrated Soft Start on Power Up
Especificaciones
24HP
36mm Depth behind Panel Including Cables
Board Height Between Rails 111.5mm
Channel Input Gain: -12dB to +20dB
Fader Gain: -100dB to +5dB (Applies to Aux1, Aux2 also)
Pan Curve: -100dB at Hard L/R, -3dB at Center
All Inputs and Outputs (Including Sends, Inserts, Headers, etc) are IN PHASE
HPF: -1.3dB at 20Hz
Manual
Normativa y garantía
Cumple con RoHS, CE y WEEE
Fabricado con procesos sin plomo.
WMD se compromete a reducir el exceso de plásticos y de un solo uso en sus productos y embalajes.
WMD garantiza nuestros productos durante 12 meses a partir de la fecha de compra. Por favor contáctenos si tiene problemas.
