Venditore: WMD

PM Channels MKII

SKU: 062-0183
Prezzo regolare $549 Prezzo di vendita $549
Spedizione calcolata al momento del pagamento.
Descrizione del prodotto
Project Status: 

Channels is still in prototyping and firmware development. Preorders will open when the hardware is in production.

Need More Inputs? 

Add four channels at a time to your Performance Mixer MKII setup, or you can use the Channels MKII as a standalone four channel mixer. 

The expansion is simple -- identical channels, just more of them. Four at a time, up to four Channels units, for 24 total stereo channels. 

A simple 16 pin 2mm pitch expansion cable is provided and is the only connection necessary. Units can be daisy-chained easily resulting in a clean setup. 

Additionally, the outputs on Channels MKII still work when connected to the PM MKII. So you get a submix of AUX1, AUX2, and MIX available for whatever you may want to do, drum submixing, FX routing, etc. 

Not Just an Expansion -- Standalone Operation

As a standalone unit, you get three stereo outputs, MIX, AUX1, AUX2. The buttons are soft mutes. It's a robust four channel setup. 

FYI -- You can not connect  CHANNELS MKIIs together without a PM MKII. The summing, buttons, and control brain is in the master section of the PM MKII. 

Recording Outputs:

Pre and Post fade headers are available on the rear for connection to the DB25 MKII. Each Chanels MKII will fill 1/2 of a DB25 with the Pre or Post connections. 

  • 4 Stereo or Dual Mono Inputs
  • 2x Stereo Auxes
  • Soft Mute Per Channel
  • Clip Indicator on Input Gain Pot
  • Channel strips are field replaceable if a pot or fader fails
  • CV control over Pan, Level, Aux1, and Aux2
  • Channel Inserts: Rear cables per channel allow for future insertable effects
  • Pan/Crossfade Switch for dual mono inputs per channel (panned center)
  • Rear Headers for Pre and Post Fader/Pan outputs to DB25
  • LEVEL and AUX2 CV can SUM or operate as VCAs
  • AUX2 can be Pre Fade or Post Fade
  • Firmware Update via Connection to PM MKII
  • All features of PM MKII when connected as expander (MIDI, CUE, GROUP, BUS)
  • Integrated Soft Start on Power Up
  • 24HP
  • 36mm Depth behind Panel Including Cables
  • Board Height Between Rails 111.5mm
  • Channel Input Gain: -12dB to +20dB
  • Fader Gain: -100dB to +5dB (Applies to Aux1, Aux2 also)
  • Pan Curve: -100dB at Hard L/R, -3dB at Center
  • All Inputs and Outputs (Including Sends, Inserts, Headers, etc) are IN PHASE
  • HPF: -1.3dB at 20Hz
Regulatory & Warranty

RoHS, CE, & WEEE Compliant

Manufactured with Lead Free Processes

WMD is committed to reducing excess and single use plastics in its products and packaging.

WMD warranties our products for 12 months from purchase date. Please contact us if you have issues.